“Overview of Recent Studies at IPST on Corrugated Board Edge Compression Strength: Testing Methods and Effects of Interflute Buckling”, Roman E. Popil, Bioresources 7(2) May 2012.“High Stiffness Surface Coating Optimization Through Starch Encapsulation of Platy Kaolin” Roman E. Popil, BioResources 5(4), 2738-2750 (2010).
“Effects of component properties and orientation on corrugated container endurance” Roman E. Popil, Barry Hojjatie , Packaging Technology and Science, 23(4), 189-202 (2010).
“Breathable Water-resistant Linerboard Coatings by Electrospraying Application” Ericka Ford, Roman E. Popil, Satish Kumar, BioResources 4(2), 714-729 (2009).
Carson, C.G., Popil, R.E., "Examining interrelationships between caliper, bending and tensile stiffness of paper in testing validation", accepted, to appear in Tappi Journal 2008.
Popil. R.E., "Application of Clay Coating for Water Resistant Corrugated Packaging" Paperboard Packaging, May/June 2008 pg 43-47.
"Transverse Shear Measurement for Corrugated Board and its Significance" by Roman Popil, C C Habeger and Douglas Coffin, Appita Journal vol. 61, no.4, 307 (2008).
"Refined nonlinear finite element models for corrugated boards",
"Strategies for economical alternatives for wax replacement in packaging"
"Transverse Shear Measurement for
Corrugated Board and its Significance’
Shear Measurement of Board Crushing Effects
Roman E. Popil, Tappi Journal, vol.5, no. 9, pg 18-26, 2006
Comparative Evaluation of the Potential for Wax-Alternative Packaging Coatings
Climbing water films in experiments on Rayleigh-Taylor instabilities
Soft X-ray diagnostic for a Z-pinch discharge
Capacitance measuring circuit for water waves
Quenching of two-plasmon decay and stimulated-Raman-scattering
instabilities by profile modification
Observation of energetic electrons produced in laser irradiated
plasmas at quarter critical density
Experimental study of KrF-laser-high-Z-plasma interaction dominated
by radiation transport
Preparation of planar multilayered targets for laser ablation
Fiducial monitor for an X-ray streak camera
Observation of energetic electrons produced in laser-irradiated
plasmas at quarter critical density
High intensity KrF laser ablation studies in single and multilayer
Energy balance and temperature in a CO/sub 2/-laser-produced
Foil calorimeter measurements of soft-X-ray energy emission
from KrF-laser-produced plasmas
Characterization of X-ray production from krypton fluoride laser-produced
Observations of stimulated Brillouin scattering and enhanced
ion wave damping in a z-pinch plasma
Ablation parameters in KrF laser/plasma interaction: an experimental
Experimental results for high intensity KrF laser/plasma interaction
Production of reproducible Rayleigh-Taylor instabilities
Stimulated Brillouin scattering from a KrF laser produced plasma
Temperature and X-ray intensity scaling in KrF laser plasma
Ion expansion characteristics from a KrF-laser-produced plasma
Energy transport in gold coated plastic targets irradiated by
a KrF laser
Measurement of KrF laser-plasma X-ray radiation from targets
with various atomic numbers
The x-ray observations of a CO/sub 2/-laser-produced plasma
"Ink and paper effects on show through in white knock out directory printing", Eadie, Donald T.; Durand, Richard; Ford, P.; Stassi, A.; Popil, R.E.; McCarthy, J.J. Proceedings of the International Printing and Graphic Arts Conference, 193-198, (1998)
"On the Causality of Physical Properties on the Printability of Wood-Containing Printing Papers", Popil, R. E. Source: 1996 Process and Product Quality Conference: Proceedings, 103-108, (October 13, 1996)
"Wavelength Dependence of Transmitted-Light Formation Measurement", Popil, R. E.; Jordan, B. D. Source: 1995 International Paper Physics Conference, 61-69, (September 11, 1995)
"On-Line Video Sensing of Surface Dirt on Pulp", Popil, R. E.; Houston, K. C. D.; Wilson, K. R. Preprints of Papers to Be Presented at the 1994 Spring Conference: Canadian Pulp & Paper Association, Technical Section, Pacific Coast and Western Branches, 6 p., (May 21, 1994)
"On-Line Video Sensing of Surface Dirt on Pulp", Popil, R. E.; Houston, K. C. D.; Wilson, K. R. Source: 1994 Process and Product Quality Conference: Proceedings, 51-56, (October 20, 1994)
"Calendering Creep Equation - Physical Model", Popil, R. E. Source: Fundamentals Pmkg. (Baker, C. F., ed.)/Trans. 9th Fundamental Res. Symp. (Cambridge), Vol. 2, 1077-1101, (Sept.; c1989, 1989)
“Measurement of KrF laser-plasma x-ray radiation from targets with various atomic numbers”, R. Popil et al.,Phys. Rev. A. 35, 3874, (1987).
“Fiducial monitor for an x-ray streak camera”, R. Popil et al.,Rev. Sci. Instrum. 57, 1049 (1986).
“Experimental results for high intensity KrF laser/plasma interaction” A.A. Offenberger et al., Laser and Particle Beams, 4, 329, (1986).
“Energy balance and temperature in a CO2 laser-produced plasma”, R Popil et al., Phys. Fluids 27, 2767, (1986).
“The x-ray observations of a CO2 laser produced plasma”, J. Meyer and R. Popil, Phys. Fluids 28, 2030, (1985).
“Production of reproducible Rayleigh-Taylor instabilities”,
R. Popil and F.L. Curzon, Rev. Sci. Instrum., 50, 1291 (1979).
Faculty & Staff
Current Students Alumni How to Give a Gift News and Events IPST Internal Site