SELECTED PUBLICATIONS

Rudman, I., and Orloff, D.I., Dynamic Thickness and Temperature Measurements During Wet Pressing and Impulse Drying," To be presented at the 2001 TAPPI Engineering Conference, San Antonio, TX, September 16-20, 2001.

Patterson, T., Orloff, D. I., and Bloom, F., "Delamination Buckling and Spalling of Plasma Sprayed Thermal Barrier Coatings," Accepted for publication in Mathematical and Computer Modeling, 2001.

Woods, A., Bloom, F., and Orloff, D., "Modeling of Flash Evaporation II: Numerical Solutions of the Model Equations," Mathematical and Computer Modelling 33 (2001) 385-406.

Woods, A., Bloom, F., and Orloff, D., "Modeling of Flash Evaporation I: Formulation of the Mathematical Model," Mathematical and Computer Modelling 32 (2000) 1153-1169.

Orloff, D. I., Phelan, P.M., and Asensio, C., "Impulse Drying Of A South African Furnish," Proceedings of the TAPPI Engineering Conference, September 17-21, 2000, Atlanta.

Orloff, D. I., and Larsson, H., "Comparison of Lab-scale and Pilot-scale Impulse Drying Experiments and Extension to Higher Impulse," Proceedings of the 12th International Drying Symposium, Paper No. 304, August 28-31, 2000, Netherlands. Accepted for publication in Drying Technology.

Orloff, D. I., Phelan, P. M., and Challas, J., "Impulse Drying Of Board Grades: Converting Trials," Tappi Journal 83(10):65 (October 2000).

Orloff, D. I., Phelan, P. M., and Crouse, J., "Impulse Drying Of Board Grades: Pilot Production Trials," Tappi Journal 83(9):57 (September 2000).

Orloff, D. I., and Crouse, J. W., "Impulse Drying: Status of the Pilot-Scale Research Program," Tappi Journal 82(9):143-149 (September 1999).

Bloom, F., Hojjatie, B., and Orloff, D. I., "Modelling and Analysis of the Heat Transfer Problem in an Impulse Drying Press Roll," Mathematical and Computer Modelling 29(5): 59-88 (March 1999).

Orloff, D. I., "Impulse Drying of Board Grades: An Emerging Technology," PaperAge, 114(12): 22-23 (December 1998).

Orloff, D. I., "Improving Capital Effectiveness: A Business Case for Breakthrough Paper Machine and Papermaking Research," PaperAge 114(9): 29-31(September 1998).

Orloff, D. I., Patterson, T., Phelan, P., Rudman, I., "Opening The Operating Window Of Impulse Drying - Part III. Controlled Decompression Experiments," Tappi Journal 81(9):159-162 (September 1998).

Orloff, D. I., Rislakki, M., and Rudman, I., "Impulse Drying Of Board Grades: Status of Commercialization," Drying'98-Proceedings of the 11th International Drying Symposium (IDS'98) Halkidiki, Greece, August 19-22, 1998, vol. B, pp. 1579-1586.

Orloff, D. I., Patterson, T., Parviainen, P. M., "Opening The Operating Window Of Impulse Drying - Part II. Pressure Differential As A Source Of Delamination," Tappi Journal 81(8): 195-203 (August 1998).

Orloff, D. I., Patterson, T., Krause, A. M., "Opening The Operating Window Of Impulse Drying - Part I. The Effect Of Ambient Pressure At Nip Opening," Tappi Journal 81(7):113-116 (July 1998).

Korach, C.S., Patterson, T. F., Orloff, D. I., "High-Speed Infrared Detection of Coated Roll Surface Defects," TAPPI Proceedings 1997, Engineering & Papermakers: Forming Bonds for Better Papermaking, Book 2, pp. 971-987, Nashville, TN, October 6-9, 1997.

Boerner, J.R., Orloff, D.I., "Acoustic Enhancement Of Dry HCL Scrubbing With Calcium Oxide," Presented At The 1996 AIChE Annual Meeting, Fundamental Separations And Reaction Processes In Pollution Control, Recycle, And Treatment, November 1996.

Phelan, P.M., Kerschner, C.M., Orloff, D.I., "The Effect Of Thermal Mass And Peak Pressure On Impulse Drying Energy Transfer," Tappi Journal 79(11):131-137 (November 1996).

Orloff, D.I., Hojjatie, B., Bloom, F., "Lubrication And Heat Transfer In A Crown-Compensated Press Roll," Tribology Transactions 39(4):745-756 (October 1996).

Hojjatie, B., Bloom, F., Orloff, D.I., "Analysis Of Lubrication For Controlled-Crown Press Rolls: A Parametric Study," Tappi Journal 79(9):164-171 (September 1996).

Patterson, T., Strand, T.A., and Orloff, D.I., "An Apparatus for the Evaluation of Web Heating Technologies: Development, Capabilities, Preliminary Results and Potential Uses," Tappi Journal 79(3):269-278 (March 1996).

Orloff, D.I., Challas, J., and Rudman, I., "Flexographic Printing of Linerboard," TAGA Proceedings, Vol.1, p.277-303, (1995).

Orloff, D.I., Phelan, P.M., and Crouse, J.W., "Linerboard Drying On A Sheet-Fed Pilot Impulse Drying Shoe Press," Tappi Journal 78(1):129-141 (January 1995).

Boerner, J., and Orloff, D.I., "The Effect Of Basis Weight And Freeness On Sheet Permeability And Critical Impulse Drying Temperature," Tappi Journal 77(2):163-168 (February 1994).

Orloff, D.I., "Impulse Drying Of Recycled Multi-ply Linerboard: Laboratory-Scale Studies," Tappi Journal 77(2):169-179 (February 1994).

Orloff, D.I., and Sobczynski, S.F., "Impulse Drying Pilot Press Demonstration: Ceramic Surfaces Inhibit Delamination," Paper Technology 34(10): 24-33 (December 1993).

Orloff, D.I., and Phelan, P.M., "Heat Transfer During Impulse Drying: The Influence Of Press Impulse And Pressure Profile", Proceedings Of The 29th National Heat Transfer Conference, HTD-Vol. 238, Heat and Mass Transfer in Pulp and Paper Processing Session, ASME, 1993.

Lenling, W.J., Smith, M.F., and Orloff, D.I., "Thermal Coating Development For Impulse Drying," Journal Of Thermal Spray Technology, 2(2): 173-178, 1993.

Orloff, D. I., "Impulse Drying Of Linerboard- IPST Observations", Presented at the Tappi Papermakers Conference, Water Removal Committee Impulse Drying Forum, April 1993.

Orloff, D.I., and Lindsay, J.D.,"Advances In Wet Pressing," Paperage, 109(1):14-15 (January 1993).

Orloff, D.I., Jones, G.L., and Phelan, P.M., "Effects Of Heating Mode On Roll Durability And Efficiency Of Impulse Drying", Proceedings Of The 28th National Heat Transfer Conference, HTD-Vol. 193, Fundamentals Of Heat Transfer In Porous Media, ASME, 1992.

Orloff,D.I., "Impulse Drying Of Paper: A Review Of Recent Research," Proceedings Of The 14th Industrial Energy Technology Conference, pp. 110-116, Houston, 1992.

Orloff, D.I., and Lindsay, J.D, "The Influence of Yield, Refining and Ingoing Solids on the Impulse Drying Performance of a Ceramic Coated Press Roll," Proceedings Of The Tappi Papermakers Conference, pp. 85-93, Nashville, 1992.

Orloff, D.I., "Impulse Drying: Heterogeneous Press Surfaces Offer New Product Opportunities," Tappi Journal 75(5): 172-176 (May 1992).

Orloff, D.I., "Impulse Drying Of Linerboard: Control Of Delamination," Journal of Pulp and Paper Science, 18(1), J23-J32 (January 1992).

Orloff, D.I., "Impulse Drying: Controlling Delamination in Heavy Weight Grades," IPST Executives' Conference, Atlanta, Ga, (May 1991).

Orloff, D.I.,"Impulse Drying of Paper - Fundamentals of Delamination and its Control", Presented at the Annual Meeting of the American Society of Chemical Engineers, (November 1989).

Chamberlain, R.E., Matthews, R.N., and Orloff, D. I., "Phosphorus Fixation In Tributylphosphate/Dodecane/Calcium Oxide Slurry Spray Flames", Presented at the National Waste Processing Conference, ASME, (June 1984).

Gandhi, P.D. and Orloff, D.I., " The Influence Of Heat transfer Modes On The Scale-Up Of Solvent Pool Burning I Controlled-Air Incinerators", Presented at the National Waste Processing Conference, ASME, (May 1982).

Orloff, D.I, and Hootman, H.E., "Combustion Rate Predictions For Controlled-Air Incinerator", Presented at the ASME/EPA Hazardous Waste Incineration Conference, (May 1981).

Orloff, D.I., "Solid Waste Combustion For Alpha Waste Incineration", U.S.Department Of Energy Report DP-1570, (February 1981).

Orloff, D.I., "Pyrolysis Model For An Alpha Waste Incinerator", Journal Of Energy, Vol.3, No.2, p.90-94, (March 1979).

Orloff, D.I., "Potential Fire Hazards and The Role Of Product Literature", Journal of Product Liability, Vol 3, pp.29-41, (1979).

Orloff, D.I., and Muhlbaier, D,R., "Steam Void Behavior During A Postulated Nuclear Excursion In A Water-Moderated Reactor Mockup", Published In Two-Phase Transport And Reactor Safety, Volume 3, Hemisphere Publishing Company, (1978).

Orloff, D.I., and Matula, R.A., "An Experimental study of the Afterburning Region of Lean Tetrafluoroethylene-Oxygen Flames", Combustion and Flame, Vol.26 pp.141-150, (1976).

Matula, R.A., Orloff, D.I., and Agnew, J.T., "Burning Velocities of Fluorocarbon-Oxygen Mixtures", Combustion and Flame, Vol. 14, pp.97-102, (1970).