J. R. Boerner, "CaO Sorption of HCl gas in an Acoustic Field," PhD. Thesis, Institute of Paper Science and Technology, 1997. James won the IPST Outstanding Student Award for 1994-1995.

J C DeBraal, "Investigation of Sheet Heating in the Press Section Utilizing Vacuum Boxes," M.S., Institute of Paper Science and Technology, 1996.

P. Parvianen, "Internal Web Temperature Profiles During High Ambient Pressure Impulse Drying," M.S., Institute of Paper Science and Technology, 1996.

M. A. Strand, "Application of Moist Paper Web Thermal Conductivity Measurement for Transient Temperature Gradient Heat Flux Calculation," M.S., Institute of Paper Science and Technology, 1995.

A. M. Krause, "Interrelationship of Sheet Temperature and Ambient Pressure as it Relates to Sheet Delamination in Impulse Drying," M.S., Institute of Paper Science and Technology, 1995.

D. C. Cansler, "Steam box Analysis: Determination of Convective Heat Transfer Coefficient," M.S., Institute of Paper Science and Technology, 1995.

C.M. Kerschner, "The Effect of Thermal Mass and Peak Pressure on Impulse Drying Energy Transfer," M.S., Institute of Paper Science and Technology, 1994.

J. R. Boerner, "The Effect of Basis Weight and Freeness on Sheet Permeability and Critical Impulse Drying Temperature," M.S., Institute of Paper Science and Technology, 1993.

R. N. Matthews, "A Theoretical Study of the Trajectories of Solid Particles Injected into the Flow Field of a Controlled-Air Incinerator Primary," M.S. Thesis, University of South Carolina, 1983.

R. Camberlain, "Fixation of Phosphorus in Spray Flames," M.S. Thesis, University of South Carolina, 1982.

P. D. Gandhi, "Pool Burning of Solvents in an Enclosure: Applications to Radioactive Waste Incineration," M.S. Thesis, University of South Carolina, 1981.

D. A. Booth, "Pyrolysis and Partial Combustion of Single Component Porous Waste Materials," M.S. Thesis, University of South Carolina, 1979.

Post Doctoral and Special Student Advising

Henric Larsson, "Comparison of Lab-scale and Pilot-scale Impulse Drying Experiments and Extension to Higher Impulse," Post Masters Student From Lund University, 1998-1999, Sweden.

Andrew Woods, "Modeling of Flash Evaporation," Post Masters Student From Northern Illinois University, 1997-1998.

Barry Hojjatie, "Shoe Press Lubrication and Heat Transfer Problems," Post Doctoral Student, From University of Florida, 1995-1998.

Markku Rislakki, "Impulse Drying Of Board Grades: Status of Commercialization, "Special Student From Helsinki University of Technology, 1996-1997.